Evaporative Cooler Service in Grand Junction, CO
Startup, shutdown, pad replacement, and repair to keep your swamp cooler ready for Grand Junction summers.
Evaporative coolers need a bit more seasonal attention than standard AC: pads wear out, pumps fail, and a unit that sat all winter usually needs a proper startup before it'll run right. GPS Plumbing & Mechanical handles spring startup, fall shutdown and winterizing, and repairs for pumps, motors, and water lines in between.
If your cooler's blowing weak or musty-smelling air, it's usually a quick fix rather than a sign you need a new unit.
Serving Grand Junction, Fruita, Palisade, Clifton, Delta, Montrose, and the rest of Mesa County.
What's included
- Spring startup & inspection
- Pad replacement
- Pump & motor repair
- Fall shutdown & winterizing
- Water line repair
- Float valve adjustment
Signs you need this
- Musty or stale-smelling airflow
- Weak airflow even with the unit running
- Water leaking from the unit or through the ceiling
- The pump isn't running or you can't hear water flowing
- Pads that are visibly worn, cracked, or mineral-caked

A recent rooftop install
Whether you need a new unit or just a seasonal tune-up, we handle evaporative coolers from the roof to the water line. We also drain and winterize them each fall.
What affects the price
Prices depend on the details, so we don't quote blind. Every job gets a free written estimate before any work starts, so you know the cost up front. Diagnostics are free in the Grand Valley. Outside the Grand Valley, a $79.99 service call fee covers locations up to 50 miles from Grand Junction, plus $2 per one-way mile beyond that. The $79.99 is credited toward the work if you go ahead with the repair; the additional mileage is not credited. Here's what usually drives the cost:
- Whether it's a seasonal service, a repair or a new unit
- The size and type of the cooler, and access to the roof
- Parts needed, such as pads, pump, motor or float valve
- Whether water lines or the roof connection need attention
How it works
Call or request service
Tell us what is going on and we will get you on the schedule.
We diagnose & quote
We diagnose the problem on site and give you a free written estimate.
We do the work
We complete the job, walk you through what we did, and warranty our labor for one year.
Evaporative Cooler Service questions
When should I start up my swamp cooler?
Usually in spring once nights stay above freezing and before the first hot stretch. A proper startup includes new pads when needed, a pump check, and clearing the water lines.
How often do evaporative cooler pads need replacing?
Often every year or two, and sooner if your water is hard and minerals cake onto the pads. Worn pads reduce cooling and can cause musty smells.
Why does my swamp cooler smell musty?
Old or dirty pads, stagnant water, and mineral buildup are the usual causes. New pads and a cleaning typically fix it. See our winterizing guide for fall care.
Do I need to winterize my evaporative cooler?
Yes. Water left in the lines and pan can freeze and crack parts. Draining the unit and shutting off the water supply each fall protects it.
Is the work warranted?
Our labor is warranted for one year. Parts and equipment are covered by the manufacturer's warranty. We do not cover or offer a warranty on customer-supplied material or equipment.
Get a free estimate
Free written estimates for evaporative cooler service, straight answers, and a licensed contractor who shows up when promised.